When a closed and delineated runway shaft with landing doors is not possible or not required, Faboc due S.r.l. can supply pantograph platforms for installation without enclosure.

The pantograph platform is capable of developing a vertical only movement to serve well-defined floors or levels up to a maximum difference in height of 2000 mm. These machines are hydraulically-operated.

On request, the platform can be made with inside hydraulic power pack, anyway the outside version is advised to simplify maintenance and repair operations. The electrical board is always installed outside.

Installation may easily be carried out either inside or outside buildings. All systems can be fitted with emergency downward travel that can be operated directly from the platform.

Specifications:

• Capacity Kg. 300
• Upper surface covered with non-slip material; on request the floor can be supplied prepared for masonry facing (marble tiles, etc.), the maximum thickness of the facing plus glue is 30mm.
• Pantographs, made of steel section bars, spaced to prevent shearing during movements
• Two bars on the pantographs for mechanically locking the platform to perform maintenance operations under safety conditions
• Safety valves for automatically blocking the downward travel in the event of breakage of the fluid power pipes
• External electro hydraulic control unit with maximum pressure valve to avoid overloads and manual emergency downward
• Automatic emergency downward travel with buffer battery (on request)
  
• Electric system built to CEI regulations
• Supply voltage 220/380 V 50 Hz three-phase, 220V mono phase on request
• Landing and on-board pushbutton panels, in low voltage (24 V)

SILVER - the Platform lift.PDF (440KB)