Built to the same exacting standards as the BKG service lift - complete wiht its own self supporting structure (with optional cladding). The hoist is equipped with safety gear and a range of safety features that are only found on passanger goods lifts for maximum personal protection during loading and unloading. There are no other safer hoists on the market.
| 
|
SPECIFICATION FOR 500KG BKG GOODS HOIST
BKG-Type: 500.10/49
** Structure **
Guide rail T 82 B
Galvanized self-supporting shaft structure
The shaft structure must be fastened to the floor, the ceiling cut-out and the ceiling.
** Landing doors **
Hinged single door at floor level, acc. to DIN 18090, galvanized sheet steel
Single machine room door, single-skin, with safety lock, galvanized sheet steel
** Car **
Capacity 500kg
Car suspension 2 : 1
Suspension 2 x roller chain acc. to DIN 8187 5/8" x 3/8"
Roller type safety gear as protection against dropping
Car galvanized sheet steel
Car bottom galvanized sheet steel
Speed governor
Wooden buffer rails
** Counterweight **
Tension weight
** Drive unit **
Type H8 with hand wheel
Structural shape B9
Speed = 0.10m/s
Worm gear, transmission i = 41
Chain wheel ø 101.5
Motor output = 2.00 kW
Motor idle-running revolutions = 1500 1/min
60 trips/h
Motor with protection class IP 20
Rated current 3 x 400V = 9.2A or Rated current 3 x 230V = 15.9A
Thermal motor protection and short circuit quick release
Starting current = 3 x rated current
Single-circuit brake 205V/DC
** Electro-technics **
Execution of the control board
Installation run
Lockable 3-pole main switch
Phase monitoring relay
Travel time control
Arrival signal, travel stop
Park landing (freely choosable)
Control voltage 24V/AC
Diagnostic system
Indications and operating elements at the landings
Position indicator, call accepted
In-use indicator, fault indicator
Call and send button, bell button
|
SPECIFICATION FOR 750KG BKG GOODS HOIST
BKG-Type: 750.15/49
** Structure **
Guide rail T 82 B
Galvanized self-supporting shaft structure
The shaft structure must be fastened to the floor, the ceiling cut-out and the ceiling.
** Landing doors **
Hinged single door at floor level, acc. to DIN 18090, galvanized sheet steel
Single machine room door, single-skin, with safety lock, galvanized sheet steel
** Car **
Car suspension 2 : 1
Suspension 2 x roller chain acc. to DIN 8187 5/8" x 3/8"
Roller type safety gear as protection against dropping
Capacity 750kg
Car galvanized sheet steel
Car bottom galvanized sheet steel
Speed governor
Wooden buffer rails
** Counterweight **
Tension weight
** Drive unit **
Type FG with hand wheel
Structural shape B9
Speed = 0.15m/s
Chain wheel ø 151.0
Motor output = 3.00 kW
Motor idle-running revolutions = 1500 1/min
60 trips/h
Rated current 3 x 400V = 9.2A or Rated current 3 x 230V = 15.9A
Thermal motor protection and short circuit quick release
Starting current = 3 x rated current
Single-circuit brake 205V/DC
** Electro-technics **
Execution of the control board
Installation run
Lockable 3-pole main switch
Phase monitoring relay
Travel time control
Arrival signal, travel stop
Park landing (freely choosable)
Control voltage 24V/AC
Diagnostic system
Indications and operating elements at the landings
Position indicator, call accepted
In-use indicator, fault indicator
Call and send button, bell button
|
